Bykski Silent PARX Stand Alone Pump (330L/H) (CP-PARX-X) Bykski

The CP-PARX-X Stand Alone water pump boasts an impressive design incorporating the CP-PARXPB-X pump core, a durable aluminum alloy armor, and a PMMA top, ensuring reliability and longevity. This pump delivers remarkable water circulation with an exceptional flow head of 3 meters. Its smooth and silent operation, ranging from 1800 to 3000 RPMs, guarantees a serene environment while efficiently maintaining water flow. The CP-PARXPB-X core has a ceramic shaft, providing an astounding lifespan of up to 50,000 hours. This outstanding longevity ensures users years of uninterrupted performance and peace of mind.

Choose the CP-PARX-X water pump for its unparalleled performance, whisper-quiet operation, and extended service life. Experience the difference in water pump technology and elevate your water circulation needs to new heights.

Features

• Superior 12 Volts DC convenience: plugs into the computer power supply
• Low maintenance, Low Noise

Specifications

• Power: DC12v / 1.5
• Voltage: 12v
• Power Connector: 4-Pin Molex
• Speed Control/Data: 4-Pin PWM
• Max RPM: 1800-3000RPM
• Maximum discharge: ~ 330L/H
• Top Material: PMMA
• Thread: G1/4
• Stand Color: Black
• Dimensions: 72.50mm x 83mm
• Diameter: 78mm

Compatibility

• Loop: Aluminum or Non-Aluminum

Included Parts

• 1x Bykski CP-PARXPB-X Liquid Cooling 12V Pump
• 1x Black Pump Armor
• 1x PMMA Top and Mounting System

Warnings

Using caustic and/or abrasive coolant will void your warranty (see warranty section) and may cause your pump to fail.
Do not run the pump dry. The D5 and DDC range of pumps are designed as self-lubricating. This means the pump’s fluid is designed to push/create flow and is also used to lubricate the internal pump parts. This design means you shouldn’t run the pumps without fluid for any reason. Running these pumps without fluid creates internal friction between the ceramic bearing and bearing housing, and that heat can crack or melt the bearing housing very quickly. It is very easy to see if your pump was “run dry” or without fluid.
1. Visual scratches along the inside of the housing. This is created when the bearing housing is melted, and the impeller spins off center.
2. Bearing housing has stress cracks or is melted. This is from heat which is created when the pump is run dry.
3. Impeller sits too low in housing. This is usually a sign that number 2 has occurred and the ceramic bearing is falling through the normal housing location.
Running Bykski pumps dry (without fluid) immediately voids the warranty. Replacements will not be given under these conditions.

Not responsible for any hardware damage. Use at your own risk.